2017年9月15日 星期五

Mould could be to blame for asthma, NZ study finds

Medical researchers are calling for urgent improvements to the quality of New Zealand homes, after their research showed leaking and mouldy houses could lead children to develop asthma.
A child with asthma using a nebuliser inhaler for breathing problems (file photo).
Leaking and mouldy houses don't just make asthma worse, they could be a cause, new research has found. Photo: 123RF
The study by the University of Otago in Wellington compared the homes of 150 children who had visited their GPs for a first prescription of asthma medication with those of 300 children who had never experienced the wheezing associated with asthma.
Dr Caroline Shorter said while it had long been known that damp and mould made asthma worse, this was one of the first studies to show those conditions might actually be causing the illness.
"We found that mould and leaks were more likely to be found in the bedrooms and homes of children who had just started wheezing compared to the children who had never wheezed."
Dr Shorter said the survey results were particularly concerning because Building Research Association of New Zealand research showed about half of all New Zealanders had mould in their homes.
There were a number of basic measures which could be taken to make homes drier, including having leaks repaired, installing good insulation and ensuring heating methods could warm the whole house, she said.
"We need to reduce moisture in our homes by using extractor fans, not drying clothes inside, and opening windows often to improve ventilation, even for just 10 minutes a day."
Even with those measures, mould could still grow, so it was important to regularly check for it - particularly around windows - and remove it as soon as it appeared, Dr Shorter said.
She said a warrant of fitness for housing could also improve home quality for New Zealand's children.
"We think that ... having more extensions to insulation schemes would be a good thing because we know that that can improve the quality of housing and the warmth of a house.
"We'd also like them to look at things like heating grants for [homes with] young babies so we get to a stage where we don't have the mould for children to be exposed to."
Dr Shorter hoped to carry out further research looking at the impact of leaky and mouldy homes on asthmatic adults.
information source:RNZ News

2017年8月3日 星期四

TPE, TPU, TPR molded on metal parts project

TPE, TPU, TPR molded on metal parts project


The elastomers plastics is a soft plastics.  It applies widely with TPE, TPU and TPR material.  And it normally can mold on another material such as metal parts
Intertech is quite professional in making above TPE, TPU and TPR molding on another metal parts such as on steel, iron, aluminum, cooper...etc either by structural assembly molding or by natural gluing-melting. See some examples as follows :
Above examples is plastic housing and plastic cover which needs strong impact result for product.



Welcome send us new project to discuss all the mold making and molding possibility in our factory in Taiwan.


http://www.taiwanmoldmaker.com


2017年8月1日 星期二

Taiwan’s Foxconn to invest billions in U.S.

Taiwan’s Foxconn to invest billions in U.S.


Taiwanese manufacturing giant Foxconn – part of the Hon Hai group -announced on Wednesday at the White House plans to invest $10 billion to build a world class LCD panel plant in the US state of Wisconsin.

The investment will create at least 3,000 jobs initially and has the potential to generate up to 13,000 jobs in the near future.

That’s just the beginning of a series of investments the company will make in the U.S. manufacturing sector in the next few years, says Hon Hai’s Chairman Terry Gou.

Never before has a Taiwanese businessman been feted in such a high-profile way in the United States – including by President Trump at the White House.

Take a look at what Mr. Gou and Trump said about this landmark deal – which Trump hopes will be part of a movement to Make America Great Again. (sourced from "Focus Taiwan)

2017年6月1日 星期四

America-USA-many metal parts for their gun

Title:  In 2014, C. Shotgun Co., , a professional shot gun manufacturer in USA
      Come to us for making many metal parts for their gun.



C. Shotgun Co., , making various different kind of shot gun in USA for long time.
They come to us for making many metal parts for their gun.  The metal parts
material is SCM430, the punch die material is with P20.  The manufacturing
process is by stamping punching.

We made the punch die and metal stamping production job for them. 
They have the partial shipment of each time with 5000pcs.  They assembly
these metal parts into their shut gun products.  They are happy with our
job and keep ship out the metal parts from us now.

Welcome those customers who needs the similar project come to us for giving you our best mold and parts quotation report and satisfied high quality mold making job in Taiwan, our factory !


Welcome contact us now :
intertech@seed.net.tw & mold.factory@msa.hinet.net
  
Intertech Machinery Inc.
Factory: No. 20, Lane 417, Min-an Rd., Hsin-Chung City, 242, Taipei County, Taiwan.

Tel: 886.2.2833.4646 Fax: 886.2.2833.4700

UFO Cloud appears in Taiwan today !

UFO Cloud appears in Taiwan today ! 

For the season, now, it is the beginning of raining season in Taiwan. Before entering the hot summer, 
Taiwan has to transferring from warm spring into hot and humid summer (Taiwan is an island) ... today, UFO cloud appears in Taiwan East cost sky...., very rare to see.... have a look now !


Pintung, Taiwan is our hometown...see I left my heart in Pingtung film now !

Pintung, Taiwan is our hometown...see I left my heart in Pingtung film now ! 

Pintung is in south of Taiwan, hot in weather and warm in hospitality...
Have a look on our hometown, then, you will get to know...why we 
have this working attitude and why we can put all our effort in 
making best quality of plastic injection mold and silicone compression 
mold and sheet metal die in Taiwan. 



Welcome to work with us for making good quality of plastic injection mold and silicone compression mold and sheet metal die.

Intertech Machinery Inc.
Factory : No. 20, Lane 417, Min-An Rd., Hsin-Chung City, 242, Taipei County, Taiwan
Tel: 886 2 2833-4646  Fax: 886 2 2833-4700  

Please send to both 1. email: intertech@seed.net.tw  2. email: intertech@seed-net.tw
G.S.M phone: 886 932 866 329  
Skype account name: debbyhsien
www.intertech.net.tw
www.taiwanmoldmaker.com

2017年5月16日 星期二

Color plastic overmolding scraper

Color plastic overmolding scraper


-          Intertech can make good colorful over molding product mold and molding service.

-          This illustrated example is injected with PP material first for the first color of handle body   
         parts, then, over molding with second color of TPE material.

-          This project is done with two molds.

-          Normally, whenever for obtaining better product out looking or getting certain strength for 
        product, customer will select to use two materials in two colors to achieve the goal.
        In such project, Intertech will give good advice for applying different material and different 
        color on one final product. Also, for those joint line in between two material, Intertech can 
        design good mold to optimize such junction. 



Intertech Machinery Inc.
Factory : No. 20, Lane 417, Min-An Rd., Hsin-Chung City, 242, Taipei County, Taiwan
Tel: 886 2 2833-4646  Fax: 886 2 2833-4700  

Please send to both 1. email: intertech@seed.net.tw  2. email: mold.factory@msa.hinet.net
G.S.M phone: 886 932 866 329  
Skype account name: debbyhsien
www.taiwanmoldmaker.com